125 Gallon Emergency Water Storage Tank

125 Gallon Emergency Water Storage Tank

Capacity: 125 Gallons
Size: 30"D x 50"H
Weight: 44 lbs.
Ships From: TX
Freight Quote:
Call 1-866-822-0022

125 Gallon Emergency Water Storage Tank | Poly-Mart Logo

125 Gallon Emergency Water Storage Tank - Poly-Mart manufactures 125 Gallon Emergency Water Storage Tanks equipped with all the necessary fittings needed to store an emergency drinking water supply at home. Many families elect to store water in their garage, basement or empty closet in preparation of Hurricanes & Earthquakes, Power Outages or a Contaminated City Water Supply. Storing Potable Drinking Water is usually at the top of the list in practicing practical preparedness. Poly-Mart 125 Gallon Emergency Water Storage Tanks enable you to store water outdoors as well! If storing your water outdoors, select a dark color to limit algae growth and store your water in the shade if possible. It's recommended to select Black, Dark Green or any of our SunShield Emergency Water Storage Tanks for outdoor water storage.

Our 125 Gallon Emergency Water Storage Tanks are made from FDA/NSF Approved, Food-Grade, BPA-Free Polyethylene and has built-in UV Inhibitors to avoid color fading and breakdown from harsh sunlight. The Poly-Mart 125 Gallon Emergency Water Storage Tanks is made in Austin, Texas and is available in a wide variety of colors. Poly-Mart Emergency Water Tanks are also available in a wide range of sizes including 100125150200250 and 500 gallons. These tanks are all preinstalled with two 3/4" Polypropylene Bulkhead Fittings & ships with (1) 3/4" Lead-Free Brass Spigot and (1) 3/4" Lead-Free Brass Ball Valve Assembly. The Brass Ball Valve Assembly is used at the base of the tank and can be used for filling or draining. The other is located 14" off the ground and off-centered from the fill/drain fitting so that there is never any interference when filling a 5 gallon bucket or pan with water.

Included Hardware Installation: Make sure to apply thread tape to all threads of all included brass hardware prior to installing them into your tank fittings. Be sure to wrap your thread tape against the grain of the threads and be sure to only wrap 2 revolutions. Thread Tape (Teflon Tape) is not included. Install slowly to avoid the chance of cross-threading. 

Lockable Stainless Steel Ball Valve Upgrade Option: If you select this option below, your tank will come with (2) 3/4" Stainless Steel Lockable Ball Valve Assemblies in replacement of the pictured Brass Hardware. Stainless Steel is a stronger, less corrosive, higher quality, doesn't rust and is great for drinking water. However most importantly, this option will allow you to lock your valves with a standard pad lock (pad locks not included). Whether your trying to deter curious children from emptying your water supply or keep someone else from using it, this is a great option!

 

(2) FREE Collapsible Water Containers INCLUDED with each Emergency Water Storage Tank purchase!

 

&

 

(1) FREE 4 ft. Drinking Water Hose INCLUDED w/ each Emergency Water Storage Tank purchase! 


125 Gallon Emergency Water Storage Tanks feature:

  • Industry Leading 5 Year Warranty
  • FDA/NSF Approved, Food-Grade, BPA-Free Polyethylene
  • 135 Gallons of Total Capacity
  • 30”D x 50”H
  • Equivalent to (2) 55 Gallon Drums w/ Less Floor Space
  • 44 lbs.
  • 8" Lid w/ Air Vent
  • 3/4” Raised Bulkhead Fitting for Filling a Pot or Pan
  • 3/4" Bulkhead w/ Plug for Hose Install or Drain
  • (1) 3/4" Lead-Free High Quality Brass Spigot
  • (1) 3/4" Lead-Free Brass Ball Valve Assembly
  • (1) 4' Drinking Water Hose for Dispensing Drinking Water
  • 4 Dome Flats & 4 Bottom Flats for Optimal Tank Customization

 125 Gallon Emergency Water Storage Tanks | Poly-Mart | PrepperWaterStorage125 Gallon Emergency Water Storage Tanks | Included Fittings

 

Download Poly-Mart 125 Drawing

Download Poly-Mart 125 PDF Brochure


125 Gallon Emergency Water Storage Tanks | Brass Ball Valve125 Gallon Emergency Water Storage Tanks | Brass Spigot125 Gallon Emergency Water Storage Tanks | Included ContainersEmergency Drinking Water Hose

Pictured Above are photos of all the items INCLUDED with a purchase of Poly-Mart 125 Gallon Emergency Water Storage Tanks! The Brass Ball Valve Assembly's are for the bottom fitting of your Emergency Water Tank. The assembly comes with a closed nipple to thread into the 3/4" tank fitting, a 3/4" Brass Ball Valve and a 3/4" Brass Male Pipe to Male Hose End Fitting. Easily attach a hose to the bottom of the tank for filling or draining! The 3/4" Hose Bib is for pulling water out of the raised fitting when the tank is in use. The 1 Gallon Collaspible Water Container is a new bonus for the holiday weekend!  

125 Gallon Emergency Water Storage Tanks | Color Chart
     

*If complete FDA Approval is preferred for your application, please select Light Blue, Dark Blue, Dark Green, Black or Natural as your color

**We have a LOW Freight Rate Gaurantee! Call 1-866-822-0022 For Your Quote!**

These Tanks are also known as: Emergency Water Tanks, Emergency Water Storage Tanks, Emergency Water Storage, Emergency Water Barrels, Water Storage Barrels, Blue Water Storage Barrels, 125 Gallon Emergency Water Tank, 125 Gallon Emergency Water Storage Tank, 125 Gallon Emergency Water Storage Container, Prepper Storage Tanks, Doorway Water Storage Tank, Indoor Water Storage Tank, Garage Water Storage Tanks, Basement Water Storage Tanks, Plastic Water Storage Tank, Plastic Long Term Water Storage Tanks, Prepper Water Storage

125 Gallon Emergency Water Storage Tanks | BPA-Free Logo

125 Gallon Emergency Water Storage Tank | PWS Logo

Poly-Mart 125 Gallon Emergency Water Storage Tanks are made from FDA-Approved, Food-Grade, BPA-Free polyethylene and is designed for above ground use.
  • Item #: PM125E
  * Marked fields are required.
*
Qty*
Price $284.99
Sale Price $227.95

Popular Add-On Items

Related Items

Reviews (0) Write a Review
No Reviews. Write a Review